Cmd command to find mac address6/28/2023 For wireless I would recommend not setting a manual IP. If using wireless click advanced, then TCP/IP, change IPV4 to static, set your info, hit apply, then apply, and your done. In OS X go to system options, click the device you are using, if Ethernet change the drop down to Static and set your info, then apply. In Windows you can go to the Control Panel, Network Settings, Adapter options, right click your NIC, Properties, Click TCP/IP v4 and click properties again, then Apply, Close, and your good. For your wired MAC address, look for a section labeled 'Ethernet Adapter Local Network. Result: This will bring your IP configuration in a verbose format. Result: This will bring up the Command Prompt. Click the cmd (Command Prompt) icon in the results. Then after saving issue the command sudo /etc/init.d/networking restart to have the machine make the changes. Go to the Start menu and in the Search box, type cmd. In linux just vi /etc/network/interfaces and then set the values in the document to something similar You could use a variety of sniffers or stumblers (Angry IP scanner, wireshark, ettercap etc) to get a lost and all of those are platform independent.Īs for changing your MAC address, are you sure you want to change your MAC or do you want to change your IP? On your own home network I really can't see any reason to change your MAC around, however if you want to set static IPs that is fairly simple. If your looking for a list of MAC addresses available on the LAN I am not sure that you can do that with the built in tools of your OS.
0 Comments
Leave a Reply. |